Hino Series 5 10 Ton FC9
Six Wheel 4×2 truck FC9 is available in following six models:
| Hino FC9JEKA (T&S) 9,900 kg GVW 6900 Payload 5,123 cc 145 hp 4,285 mm |
| Hino FC9JJKA 10,100 kg 5,123 cc 145 hp 5,635mm |
| Hino FC9JELA (T&S) 9,900 kg 5,123cc 175 hp 4,285 mm |
| Hino FC9JELA (T-F/W PTO) 9,900 kg 5,123cc 175 hp 4,285 mm |
| Hino FC9JJLA Radial Tube 10,100 kg 5,123 cc 175 hp 5,635 mm |
| Hino FC9JLLA Radial Tube 10,200 kg 5,123 cc 175 hp 6,625 mm |
FC9JJLA
HINO 500 Dominator FC9JJLA is a 6-wheel truck made for general cargo handling. Economical and cost-effective. Comes with LED Day Light and chrome grille, sporty look with 5.6 meters per body, making the HINO FC9JJLA truck suitable for transporting trucks or refrigerated containers for use in shipping products
| clutch | |
|---|---|
| Pattern: | Dry one sheet Controlled by a hydraulic system with pressure to help |
| list | ||
|---|---|---|
| Gross vehicle weight (GVW) | 9,900 kg | |
| Chassis weight | page | 1,895 kg |
| after | 1,090 kg | |
| Total | 2,985 kg | |
| Super narrow turning radius | At the tire | 5,500 mm |
| At the outermost part of the hood | 6,200 mm | |
| The minimum distance of the car (Measured at the rear axle) | 220 mm | |
| Number of seats | 3 |
| A | B | C | D | E | E ‘ | F | G | H | I | J | K |
| 3,420 | 6,195 | 2,160 | 2,480 | 2,795 | 4,285 | 1,490 | 800 | 885 | 1,770 | 1,660 | 820 |
| A Wheel Range | F Submission |
| B total length | G frame height at the front axle |
| C Total width | H frame height at the rear axle |
| D total height | I the distance between the center of the front wheel |
| E after the hood to the rear wheel center | J distance between the rear wheels |
| E ‘after the hood to the end of the chassis | K chassis width |
Transmission system: 6 gears, forward gears, 2-6 synchronous gears
| Weight support system | |
| Rear axle: | All floating Single gear High gear type |
| Load-bearing performance | 7,000 kg |
| Front axle: | “I” shaped steel beams |
| Load-bearing performance | 3,700 kg |
| Braking system: | Hydraulic consists of a pair of conductor brakes acting on every hydraulic pressure wheel. 2 independent circuits. |
| Handbrake: | Brake break mechanism Act on the middle shaft |
| Exhaust brake: | Working with pressure Electrically controlled |
| Steering system: | Rotating bearing There is a hydraulic system to help relieve stress. |
| Ratio | 18.6 |
| Suspension system | |
| page : | Tweezers and shock absorbers |
| After: | Tweezers and tweezers help |
| Wheels and tires | |
| Wheel type | 6.00GS x 16 inch diameter, 6 wheel nut |
| Tire size: | 8.25-16-14 floor |
| gas tank : | 100 liters |
| Chassis beam | Step-shaped steel “]” |
| Cab head | Welded forming steel Using 2-layer safety glass “Laminated” |
| electrical equipment | |
| Battery: | 2 children, each 12 volts, 120 amperes – hours when the charge rate is 20 hours |
| electricity generator : | AC 24 volts 60 amperes |
| air conditioner : | DENSO (factory standard installation) |
| Safety equipment: | Steering wheel airbag |
| Optional equipment | Roof spoiler |
FC9JJLA Specs
Engine: Hino Model J05E-TC
Model: 4- stroke diesel engine, 4- cylinder straight line overhead camshaft Cooled by water Turbo inter cooler
Maximum horsepower (EEC Net): 129 kW (175 hp ) when the engine spins 2,500 cycles / minute
Maximum torque (EEC Net): 500 Nm (51.0 kg ) when the engine spins 1,500 cycles / minute
Fuel supply system : Common rail controlled by computer system
Combustion system : Direct injection type
The Big Bore x Stroke : 112 x 130 mm .
Cylinder capacity : 5,123 CC
Compression ratio : 18.0: 1
Exhaust standards: Euro 3
Clutch: dry, single sheet Controlled by hydraulic system Automatic setting
Transmission : Transmission 6 gears forward gears, 2 -6 synchronous mesh.
Ratio
| Gear 1 | 8.190 |
| 2nd gear | 5.072 |
| Gear 3 | 2.981 |
| 4th gear | 1.848 |
| Gear 5 | 1.343 |
| Gear 6 | 1.000 |
| Reverse gear | 7.619 |
| Rear gear ratio | 3.636 |
Weight support system
Front axle: I-shaped steel beam
Capacity: 3,800 kg
Rear axle: all floating Single gear High gear type
Capacity: 7,000 kg
Brake system: Hydraulic consists of double conductor brake actuators, all-wheel-controlled hydraulic pressure, two independent circuits.
Handbrake brake: The braking mechanism Act on the middle shaft
Auxiliary brakes: Brake exhaust works with vacuum controlled by electricity.
Steering system: rotating bearing There is a hydraulic system to help relieve stress.
Ratio: 18.6
Suspension system
Page: Tweezers and shock absorbers
Back: Tweezers and tweezers help
Wheels and tires
Wheel type: 6.00GSx16 inch, 6 wheel nut
Front tire size: 8.25R16-14 floor
Specification
Oil tank capacity: 100 liters
Chassis beams: steel, steps, cutting faces]
Cab head: welded forming steel
Windshield: Laminated
Electrical systems and equipment
Battery: 2 balls, 12 volts, 120 amperes – hour When the charge rate is 20 hours
Generator: AC 24 volts 60 amperes
Safety belt: 3 points -2 points -3 points
Audio: CD + MP3 and USB
Seat: 3 seats, made of fine vinyl material The driver’s seat can be reclined.
Steering wheel: collapsible model with airbag
Air conditioners: DENSO installed from the factory standard
Optional equipment: roof spoiler
GVW 10,000 kgs and Payload 7000 kgs (6980)
| list | ||
|---|---|---|
| Gross vehicle weight (GVW) | 10,200 kg | |
| Chassis weight | page | 1,920 kg |
| after | 1,120 kg | |
| Total | 3,040 kg | |
| Super narrow turning radius | At the tire | 6,800 mm |
| At the outermost part of the hood | 7,500 mm | |
| The minimum distance of the car (Measured at the rear axle) | 220 mm | |
| Number of seats | 3 |
HINO model FC9JJLA
Total vehicle weight Net weight (GVW): 10,200 kg
Chassis weight
Page: 1,920 kg
Back: 1,120 kg
Total: 3,040 kg
The minimum distance of the car (Measured at the rear axle): 220 mm
Seating capacity: 3 seats
Maximum speed: 121 km / hour
Steepness capability: 35.3% (19.0 degrees)
Super narrow turning radius (at the tire): 6,800 mm.
Super narrow turning radius (At the outermost part of the cab): 7,500 mm
| A Wheel Range | 4,350 mm. |
| B total length | 7,545 mm. |
| C Total width | 2,160 mm. |
| D total height | 2,490 mm. |
| E after the hood to the rear wheel center | 3,725 mm. |
| E ‘after the hood to the end of the chassis | 5,635 mm. |
| F Submission | 1,910 mm. |
| G frame height at the front axle | 815 mm. |
| H frame height at the rear axle | 885 mm. |
| I the distance between the center of the front wheel | 1,770 mm. |
| J distance between the rear wheels | 1,660 mm. |
| K chassis width | 820 mm. |
B | C | D | E | E ‘ | F | G | H | I | J | K | |
| 4,350 | 7,545 | 2,160 | 2,490 | 3,725 | 5,635 | 1,910 | 815 | 885 | 1,770 | 1,660 | 820 |
| A Wheel Range | F Submission |
| B total length | G frame height at the front axle |
| C Total width | H frame height at the rear axle |
| D total height | I the distance between the center of the front wheel |
| E after the hood to the rear wheel center | J distance between the rear wheels |
| E ‘after the hood to the end of the chassis | K chassis width |
Transmission system: 6 gears, forward gears, 2-6 synchronous gears
| Weight support system | |
| Rear axle: | All floating Single gear High gear type |
| Load-bearing performance | 7,000 kg |
| Front axle: | “I” shaped steel beams |
| Load-bearing performance | 3,800 kg |
| Braking system: | Hydraulic consists of a pair of conductor brakes acting on every hydraulic pressure wheel. 2 independent circuits. |
| Handbrake: | Brake break mechanism Act on the middle shaft |
| Exhaust brake: | Working with pressure Electrically controlled |
| Steering system: | Rotating bearing There is a hydraulic system to help relieve stress. |
| Ratio | 18.6 |
| Suspension system | |
| page : | Tweezers and shock absorbers |
| After: | Tweezers and tweezers help |
| Wheels and tires | |
| Wheel type | 6.00GS x 16 inch diameter, 6 wheel nut |
| Tire size: | 8.25R-16-14 floor for model FC9JJLA, FC9JLLA |
| gas tank : | 100 liters |
| Chassis beam | Step-shaped steel “]” |
| Cab head | Welded forming steel Using 2-layer safety glass “Laminated” |
| electrical equipment | |
| Battery: | 2 children, each 12 volts, 120 amperes – hours when the charge rate is 20 hours |
| electricity generator : | AC 24 volts 60 amperes |
| air conditioner : | DENSO (factory standard installation) |
| Safety equipment: | Steering wheel airbag |
| Optional equipment | Roof spoiler |